GATE XE Pulses, Oilseeds & Plant Protein Technology: practice questions
GATE — Engineering Sciences (XE), Section G Food Technology · India · IITs and IISc on rotation (2027: IIT Madras)
Original practice questions written to the published syllabus · not past papers
8worked here, free
19written to this exam in this subject
12syllabus units
About GATE XE
GATE — Engineering Sciences (XE), Section G Food Technology is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks. MCQ, MSQ and NAT. General Aptitude is common to every GATE paper; within XE, Section A Engineering Mathematics is compulsory (stated on the 2026 XE-A syllabus) and the candidate chooses two further sections, of which G Food Technology is one. The split of marks between GA, XE-A and the two chosen sections is from Laisha's knowledge of earlier brochures and was not re-read for 2026.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Pulses, Oilseeds & Plant Protein Technology in GATE XE
Section 3 oil processing and product technology; expect items on oilseed meals, soybean processing and protein isolate steps alongside oil extraction questions.
Turning legumes and oilseeds into foods and protein ingredients: dehulling and splitting, removal of anti-nutritional factors, traditional legume products, soy foods, and protein concentrates and isolates and their functional properties.
Our 19 GATE XE questions in this subject: 10 easy, 5 medium, 4 hard, across 12 units.
8 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 8 were written to GATE XE and are not shown on any other exam's page.
Question 1 · easy
Which pulse is notably difficult to dehull because gums bind the husk to the cotyledons?
Pigeon pea
Masoor lentil
Pea
Chickpea
Answer and working
A. Pigeon pea
Black gram and green gram are also difficult.
Question 2 · easy
The insoluble residue left after filtering soy milk is called:
Yuba
Miso paste
Okara
Tofu
Answer and working
C. Okara
Okara is used in foods and feed.
Question 3 · hard
The beany flavour of soy milk is caused mainly by:
Microbial fermentation of oligosaccharides
Trypsin inhibitors reacting with sugars
Maillard reactions during boiling
Lipoxygenase acting on unsaturated lipids
Answer and working
D. Lipoxygenase acting on unsaturated lipids
Hexanal and other volatiles form when beans are ground with water and air.
Question 4 · medium
Which coagulant gives silken tofu by slow acidification?
Glucono-delta-lactone
Common sodium chloride
Magnesium chloride
Calcium sulphate
Answer and working
A. Glucono-delta-lactone
GDL hydrolyses slowly to gluconic acid.
Question 5 · medium
Sunflower protein products turn green when processed at alkaline pH because of:
Glucosinolate breakdown
Chlorogenic acid
Aflatoxin
Gossypol
Answer and working
B. Chlorogenic acid
Phenolics oxidise and react with protein.
Question 6 · hard
In isolate manufacture, protein is precipitated from the alkaline extract by adjusting the pH to about:
7.0
4.5
2.0
9.0
Answer and working
B. 4.5
The isoelectric point of soy and pea proteins.
Question 7 · easy
Textured vegetable protein is made mainly by:
Spray drying
Extrusion cooking
Fermentation
Freeze drying of curd
Answer and working
B. Extrusion cooking
Low-moisture extrusion gives expanded chunks.
Question 8 · easy
Colour sorting of groundnut kernels is important mainly because it removes:
Kernels with the highest protein
Kernels carrying most of the aflatoxin
Kernels that are too large
Kernels with the most oil
Answer and working
B. Kernels carrying most of the aflatoxin
Damaged and discoloured kernels carry most of it.
A study plan for Pulses, Oilseeds & Plant Protein Technology in GATE XE
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (47% of the 19 questions): Soybean processing: soy milk, tofu and fermented soy foods (3, 16%); Anti-nutritional factors in legumes and oilseeds and their removal (2, 11%); Dehulling and splitting of pulses (2, 11%); Protein concentrates and isolates: extraction and purification (2, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Soaking, germination, cooking, roasting and fermentation of legumes (2, 11%); Structure and composition of pulses and oilseeds (2, 11%); Functional properties of plant proteins (1, 5%); Oilseed meals and cakes as food ingredients (1, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Peanut and other nut processing (1, 5%); Plant-based dairy analogues (1, 5%); Textured vegetable protein (1, 5%); Traditional pulse products (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Dehulling and splitting of pulses (1 hard of 2), Protein concentrates and isolates: extraction and purification (1 hard of 2), Structure and composition of pulses and oilseeds (1 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Anti-nutritional factors in legumes and oilseeds and their removal (2 easy of 2); Peanut and other nut processing (1 easy of 1).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.