ICAR AICE-JRF/SRF Cereal Science & Milling Technology: practice questions
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering · India · ICAR through the National Testing Agency
Original practice questions written to the published syllabus · not past papers
10worked here, free
20written to this exam in this subject
12syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Food Processing Technology, Food Safety & Quality, Processing and Food Engineering is a PhD, fellowship and lectureship exam run by ICAR through the National Testing Agency, for candidates in India. Computer-based, multiple choice.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Cereal Science & Milling Technology in ICAR AICE-JRF/SRF
35.a Unit 2 food grain processing: deeper questions on dough rheology, starch conversion and modification, rice bran stabilisation, extrusion and millet processing.
The structure and chemistry of cereal grains and millets and how they are milled into flour, semolina, rice and maize products, with the flour quality tests that decide what each flour can make.
Our 20 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 6 medium, 14 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
Two flours have the same protein content but bake very differently. The most likely reason is:
Differences in nitrogen conversion factor used
One flour must contain added starch
The bake test is not reproducible
Differences in gluten quality
Answer and working
D. Differences in gluten quality
Protein quantity is not quality; glutenin subunit composition matters.
Question 2 · medium
The alveograph inflates a dough sheet into a bubble because this mimics:
Compression of dough in a moulder
Shear in a high-speed mixer
Biaxial stretching by gas cells
Heating of dough in an oven
Answer and working
C. Biaxial stretching by gas cells
Gas cell growth stretches dough in two directions.
Question 3 · hard
A biscuit miller wants a flour with low P/L and moderate W on the alveograph. What kind of dough does this describe?
Extensible dough with modest strength
Dough with maximum water absorption
Very tenacious dough with high strength
Dough with no extensibility at all
Answer and working
A. Extensible dough with modest strength
Low P/L means extensible relative to tenacity; biscuits need extensible, not very strong, doughs.
Question 4 · hard
A batch of paddy dried rapidly at high temperature shows low head rice yield. What is the most likely cause?
Excess amylose formed during drying
Fissures from rapid moisture change
Loss of aroma compounds during drying
Germination of the paddy during drying
Answer and working
B. Fissures from rapid moisture change
Rapid drying or rewetting causes stress cracks that break in milling.
Question 5 · hard
Why is high β-glucan undesirable in brewing malt?
It inhibits yeast fermentation completely
It slows wort filtration and causes haze
It reduces the colour of the beer
It destroys amylase during mashing
Answer and working
B. It slows wort filtration and causes haze
Poor modification leaves β-glucan that gums up filtration.
Question 6 · hard
The US FDA oat health claim (1997) is based on a daily intake of β-glucan of:
0.3 g
10 g
3 g
30 g
Answer and working
C. 3 g
3 g/day of β-glucan from whole oats.
Question 7 · hard
Why does fermentation improve the mineral nutrition of millet foods?
It degrades phytate that binds iron and zinc
It removes all tannins by evaporation
It adds minerals produced by bacteria
It increases the fat content of the food
Answer and working
A. It degrades phytate that binds iron and zinc
Phytase activity in fermentation releases minerals.
Question 8 · hard
Breads made mainly from millet flour need hydrocolloids or blending with wheat because millets:
Cannot be milled into fine flour
Have no starch to gelatinise
Lack gluten-forming proteins
Contain too much gluten
Answer and working
C. Lack gluten-forming proteins
Without gluten, there is no network to hold gas; see bakery-pasta-snacks.
Question 9 · hard
Why is physical refining often preferred for rice bran oil?
Physical refining needs no deodorisation
Alkali refining raises the free fatty acid content
Physical refining removes all waxes automatically
Alkali refining loses much of the γ-oryzanol
Answer and working
D. Alkali refining loses much of the γ-oryzanol
Oryzanol is removed with soapstock in alkali refining.
Question 10 · hard
How does high fibre content in an extruder feed usually affect expansion?
It prevents gelatinisation completely
It doubles expansion by trapping steam
It has no effect on expansion
It reduces expansion, giving denser products
Answer and working
D. It reduces expansion, giving denser products
Fibre particles disrupt cell walls and limit bubble growth.
A study plan for Cereal Science & Milling Technology in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (50% of the 20 questions): Breakfast cereals and instant cereal products (3, 15%); Starch modification: physical, chemical and enzymatic (3, 15%); Dough rheology tests: farinograph, mixograph, extensograph and alveograph (2, 10%); Millet processing and products (2, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Oat milling and beta-glucans (2, 10%); Rice bran stabilisation and by-product utilisation (2, 10%); Dry and wet milling of maize; starch, syrups and germ oil (1, 5%); Flour quality: protein, gluten, falling number and ash (1, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Malting of barley and other grains (1, 5%); Rice milling and parboiling: quality and by-products (1, 5%); Structure and composition of wheat, rice, maize, barley, oats, sorghum and millets (1, 5%); Wheat milling: conditioning, break, reduction and flour streams (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Millet processing and products (2 hard of 2), Oat milling and beta-glucans (2 hard of 2), Rice bran stabilisation and by-product utilisation (2 hard of 2).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.