LAISHA
Open Laisha

Rajasthan PSC Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser: practice questions

Rajasthan PSC — Assistant Agriculture Engineer (Agriculture Engineering syllabus) · India · Rajasthan Public Service Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
46written to this exam in this subject
15syllabus units

About Rajasthan PSC

Rajasthan PSC — Assistant Agriculture Engineer (Agriculture Engineering syllabus) is a government recruitment exam run by Rajasthan Public Service Commission, for candidates in India. Objective paper; the paper structure was not captured.

Source: rpsc.rajasthan.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser in Rajasthan PSC

Machines that prepare the seedbed and put seed and fertiliser in the ground, and how to calibrate and cost them.

Our 46 Rajasthan PSC questions in this subject: 34 easy, 10 medium, 2 hard, across 15 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Rajasthan PSC and are not shown on any other exam's page.

Question 1 · easy

Which part of a mouldboard plough bottom resists the side thrust from the turning furrow slice?

  1. Share
  2. Landside
  3. Frog
  4. Jointer
Answer and working

B. Landside

The landside presses against the furrow wall and takes the lateral force of the slice being turned. The share cuts, the frog is the body to which parts bolt, and the jointer turns a small corner ribbon.

Question 2 · easy

The size of a mouldboard plough is expressed as

  1. width of cut of each bottom and the number of bottoms
  2. the diameter of the mouldboard
  3. the depth of ploughing
  4. the tractor power it needs
Answer and working

A. width of cut of each bottom and the number of bottoms

A plough is specified by the width of cut per bottom and number of bottoms, which fix total width. Depth is a setting and power depends on soil.

Question 3 · easy

Which disc harrow has one front gang and one rear gang placed to one side of the tractor centre line?

  1. Single-action disc harrow
  2. Offset disc harrow
  3. Double-action tandem disc harrow
  4. Vertical-disc plough
Answer and working

B. Offset disc harrow

The offset harrow's two gangs work in opposite directions and are offset laterally, letting it work under tree branches. Single-action has two gangs end to end; tandem has four gangs.

Question 4 · medium

The bakhar used in the black soils of central India is best described as a

  1. blade harrow that cuts beneath the surface with a horizontal blade
  2. spike-tooth harrow with pegs that stir the surface
  3. disc harrow
  4. rotary puddler with bladed rotors on a horizontal shaft for wet fields
Answer and working

A. blade harrow that cuts beneath the surface with a horizontal blade

The bakhar is a traditional blade harrow; its horizontal blade cuts under the crust and kills weeds.

Question 5 · medium

On a mounted mouldboard plough, the width of cut of the front bottom is adjusted mainly by

  1. rotating or shifting the cross-shaft of the linkage
  2. lengthening or shortening the top link to tilt the whole frame
  3. changing tyre pressure
  4. changing PTO speed
Answer and working

A. rotating or shifting the cross-shaft of the linkage

Moving the cross-shaft changes the front bottom's lateral position relative to the tractor wheel and hence its width. The top link sets fore-and-aft level.

Question 6 · easy

Which crop is normally sown with a precision planter rather than a grain drill?

  1. Wheat
  2. Maize
  3. Barley
  4. Oats
Answer and working

B. Maize

Maize is a wide-row crop sown seed by seed at a set spacing. Small grains such as wheat, barley and oats are drilled in a continuous stream.

Question 7 · easy

A spinning-disc fertiliser broadcaster distributes granules by

  1. dropping them through openings across the full width
  2. throwing them with vanes on a rotating disc
  3. blowing them through a boom
  4. injecting them with knives
Answer and working

B. throwing them with vanes on a rotating disc

Centrifugal broadcasters throw granules from vaned discs. Drop spreaders use openings along the hopper and pneumatic spreaders use a boom.

Question 8 · easy

Field efficiency is defined as

  1. effective field capacity divided by theoretical field capacity
  2. theoretical divided by effective field capacity
  3. drawbar power divided by engine power
  4. area covered divided by fuel used
Answer and working

A. effective field capacity divided by theoretical field capacity

FE = EFC/TFC, always at most 100 %. Power ratios describe tractive or transmission efficiency, not field efficiency.

Question 9 · medium

Which change would most improve field efficiency of a tillage operation?

  1. Increasing forward speed alone
  2. Working longer runs with fewer turns in larger, regular fields
  3. Using a wider implement with more overlap between adjacent passes
  4. Adding more ballast
Answer and working

B. Working longer runs with fewer turns in larger, regular fields

Turning time is a main loss; long runs in regular fields reduce turns per hectare. Wider implements with more overlap lower effective width, and speed changes TFC more than efficiency.

Question 10 · hard

A custom hiring centre is deciding whether to buy a paddy transplanter. Which factor most directly lowers its cost per hectare?

  1. A higher interest rate
  2. A shorter useful life
  3. A lower field efficiency
  4. More hectares served per season across many farms
Answer and working

D. More hectares served per season across many farms

Spreading fixed cost over more hectares is the economic reason for custom hiring. Higher interest, shorter life and lower efficiency all raise cost per hectare.

A study plan for Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser in Rajasthan PSC

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (43% of the 46 questions): Cost analysis of implements (4, 9%); Field capacity and field efficiency (4, 9%); Mouldboard plough (4, 9%); Objectives and types of tillage (4, 9%); Seed drills and planters (4, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Calibration of seed drills (3, 7%); Fertiliser distributors (3, 7%); Furrow geometry (3, 7%); Furrow openers (3, 7%); Harrows, cultivators and rotavators (3, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Seed-metering mechanisms: fluted roller, cup, plate and pneumatic (3, 7%); Chisel plough and subsoiler (2, 4%); Disc plough (2, 4%); Forces on tillage tools, draft and hitching (2, 4%); Paddy and vegetable transplanters (2, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Cost analysis of implements (1 hard of 4), Seed drills and planters (1 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Fertiliser distributors (3 easy of 3); Seed-metering mechanisms: fluted roller, cup, plate and pneumatic (3 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Rajasthan PSC Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.