GATE — Agricultural Engineering (AG) · India · IITs and IISc on rotation (2027: IIT Madras)
Original practice questions written to the published syllabus · not past papersGATE — Agricultural Engineering (AG) is a postgraduate admission exam run by IITs and IISc on rotation (2027: IIT Madras), for candidates in India. Computer-based, 3 hours, 100 marks (15 General Aptitude + 85 technical: 25 one-mark and 30 two-mark questions). MCQ, MSQ and NAT; negative marking on MCQ only (−1/3 for one-mark, −2/3 for two-mark); no partial credit on MSQ. On-screen virtual calculator.
Source: gate2027.iitm.ac.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Numerical engine performance every year: IP from IMEP, BP from torque, mechanical and brake thermal efficiency, BSFC, volumetric efficiency; occasionally Otto/air-standard efficiency, fuel properties (calorific value, cetane, API gravity) and governor regulation or torque reserve. NAT questions need correct units: watch N/2 for four-stroke engines and kJ vs MJ.
How tractor engines work and how their performance is measured — the single most reliably examined farm-power topic.
Our 39 GATE questions in this subject: 5 easy, 12 medium, 22 hard, across 12 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to GATE and are not shown on any other exam's page.
A diesel cylinder has a bore of 100 mm, a stroke of 125 mm and a clearance volume of 70 cm³. Its compression ratio is closest to
A. 15.0
Vs = (π/4)(10 cm)²(12.5 cm) = 981.7 cm³. r = (Vs + Vc)/Vc = (981.7 + 70)/70 = 15.02. Dividing Vs by Vc alone gives 14.0 (that is r − 1); using πD²L without the 1/4 and then also forgetting to add Vc back (Vs/Vc) gives 56.1. 16.0 counts the clearance volume twice, (Vs + 2Vc)/Vc.
The air-standard efficiency of an Otto cycle with a compression ratio of 8 (γ = 1.4) is closest to
C. 56.5%
η = 1 − 1/r^(γ−1) = 1 − 8^(−0.4) = 1 − 0.4353 = 56.5%. Using 1 − 1/r (87.5%) or exponent γ instead of γ − 1 (94.6%) are the common slips; 43.5% is the fraction rejected, not the efficiency.
An air-standard Diesel cycle has a compression ratio of 16 and a cut-off ratio of 2 (γ = 1.4). Its efficiency is closest to
A. 61.4%
η = 1 − (1/r^0.4)·(ρ^γ − 1)/[γ(ρ − 1)] = 1 − (1/3.0314)·(2.6390 − 1)/(1.4 × 1) = 61.4%. 67.0% is the Otto value at r = 16; dropping γ from the denominator gives 45.9%. 93.8% is 1 − 1/r, forgetting the exponent γ − 1.
Raising the compression ratio of an Otto cycle from 6 to 9 (γ = 1.4) raises its air-standard efficiency by about how many percentage points?
A. 7.3
η6 = 1 − 6^(−0.4) = 51.2%; η9 = 1 − 9^(−0.4) = 58.5%; difference = 7.3 points. 14.3 is the relative (percentage) increase, not percentage points. 5.6 drops the exponent: 1/6 − 1/9 = 0.056.
Load control in a diesel engine is called quality governing because
D. the air is not throttled and only the fuel quantity (hence mixture strength) is varied
A diesel takes a full charge of air at all loads; the governor varies fuel, so the air-fuel ratio (quality) changes. SI engines throttle the mixture quantity at near-constant ratio: quantity governing.
Taking diesel as n-dodecane (C12H26) and air as 21% O2 and 79% N2 by volume, the stoichiometric air-fuel ratio by mass is closest to
A. 14.9
C12H26 + 18.5 O2 → 12 CO2 + 13 H2O. Air = 18.5 × (32.0 + 3.76 × 28.01) = 2541 kg per kmol fuel; fuel = 170.3 kg/kmol. A/F = 2541/170.3 = 14.9. 3.48 is the oxygen-fuel ratio only; 88.1 is the molar air-fuel ratio. Burning the carbon only (12 O2) gives 9.66.
A four-stroke engine of 4.0 L total displacement produces 40 kW brake power at 2,000 rev/min. Its brake mean effective pressure is
B. 6.0 bar
BMEP = BP/(Vd × N/120) = 40,000/(0.004 × 2000/120) = 600000 Pa = 6.0 bar. Using N/60 halves it to 3.0 bar; 1.5 bar divides by four as if a per-cylinder figure were needed, but the 4.0 L total displacement already covers all cylinders.
An engine uses 10 kg of diesel per hour while delivering 40 kW brake power. Its BSFC is
B. 250 g/kWh
BSFC = mf/BP = 10 kg/h ÷ 40 kW = 0.25 kg/kWh = 250 g/kWh. 400 comes from inverting the ratio (40/10 = 4, read as 400 g/kWh); fuel goes on top. 4.0 kg/kWh also inverts it.
A tractor engine has a BSFC of 250 g/kWh with fuel of lower calorific value 42 MJ/kg. Its brake thermal efficiency is
B. 34.3%
ηbt = 3600/(BSFC [kg/kWh] × CV [kJ/kg]) = 3600/(0.25 × 42,000) = 0.343 = 34.3%. Mixing MJ and kJ gives a factor-of-1000 error; inverting the formula gives 2.9, which is (1/η) × 100. Leaving out the 3600 kJ/kWh conversion gives 1/(0.25 × 42) = 9.5%.
A diesel at full load draws 300 kg/h of air and burns 12 kg/h of fuel. Taking the stoichiometric air-fuel ratio as 14.5, the equivalence ratio is closest to
D. 0.58
Actual A/F = 300/12 = 25.0. φ = (A/F)stoich/(A/F)actual = 14.5/25.0 = 0.58 (lean, as diesels always are). 1.72 is the excess-air ratio λ, the reciprocal. 0.04 is 1/25, the fuel-air ratio.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.